| ITEM / MODEL |
HMC-500 |
HMC-500H |
HMC-630 |
HMC-630H |
| Table working surface (mm) |
500 x 630 (19.7" x 24.8") |
630 x 800 (24.8" x 31.5") |
| Table load max. (kg) |
550 (1210 lb) |
1200 (2640 lb) |
| Screw hole |
M16 x P2.0 |
M16 x P2.0 |
| Longitudinal travel (x) (mm) |
762 (30") |
1016 (40") |
| Cross travel (Y) (mm) |
660 (26") |
813 (32") |
| Vertical travel (Z) (mm) |
660 (26") |
890 (35") |
| Spindle nose to table (mm) |
150~810 (5.9"~31.9") |
200~1090 (7.8"~42.9") |
| Spindle center to table top (mm) |
50~710 (2"~28") |
50~863 (2"~33.9") |
| Spindle speed & taper (rpm) |
Std. |
Direct drive 15000 (BBT-40) |
Direct drive 6000
(BT / CAT / BBT-50) |
Direct drive 15000 (BBT-40) |
Direct drive 6000 rpm
(BT / CAT / BBT-50) |
| Opt. |
Built-in 15000 / 18000 / 24000 (HSK A63) |
 Direct drive 10000 (BT / CAT / BBT-50 / HSK A100)
 Built-in 15000
(HSK A100) |
Built-in 15000 / 18000 / 24000 (HSK A63) |
Direct drive 10000 (BT / CAT / BBT-50 / HSK A100)
Built-in 15000
(HSK A100) |
Spindle motor
(cont. / 30min) (kW) |
Std. |
7.5 / 11 |
26 / 30 |
7.5 / 11 |
26 / 30 |
| Opt. |
18 / 23 |
 26 / 30
 32 / 42 |
18 / 23 |
26 / 30
32 / 42 |
| X-Y-Z Cutting feed (mm/min ) |
1~15000 |
1~12000 |
| X-Y-Z Rapid traverse (m/min ) |
40 / 40 / 40 |
| Tool magazine capacity |
Arm type 40 (60, 80, 120 Opt.) |
| Max. tool diameter x length |
Ø75 x 320 |
Ø125 x 385 |
Ø75 x 320 |
Ø125 x 400 |
| Max. tool weight (kg) |
10 (22 lb) |
15 (33 lb) |
10 (22 lb) |
15 (33 lb) |
| Tool selection |
Bi-direction random type shortest path |
| Tool to tool change time (sec) |
1.98 |
3.5 |
1.98 |
3.5 |
| Hydraulic pump motor (kW) |
3.8 |
| X, Y, Z axis drive motor (kW) |
3.8 / 3.8 / 3.8 |
3.8 / 4.5 / 3.8 |
3.8 x 2 / 3.8 / 4.5 |
3.8 x 2 / 4.5 / 4.5 |
| Table index |
1° (0.001° Opt.) |
| Number of pallets |
2 (6, 12 Opt.) |
| Change time (APC) (sec) |
8 |
15 |
Machine dimensions
(L x W x H) (mm) |
5725 x 3615 x 3150 (225.4"x142.3"x124") |
6050 x 4000 x 3340 (238" x 157.5" x 131.5") |
| Machine weight (kg) |
11000 (24200 lb) |
18000 (39600 lb) |
