| TEM / MODEL |
VHMC-630 |
| Table working surface (mm) |
630 x 630 (24.8" x 24.8") |
| Table load max. (kg) |
1200 (2640 lb) |
| Screw hole |
M16 x P2.0 |
| X axis travel (mm) |
1000 (39.4") |
| Y axis travel (mm) |
800 (31.5") |
| Z axis travel (mm) |
950 (37.4") |
| HORIZONTAL |
Spindle nose to table center (mm) |
-150~800 (-5.9"~31.5") |
| Spindle center to table top (mm) |
50~850 (2"~33.4") |
| VERTICAL |
Spindle nose to table center (mm) |
150 ~ 950 (5.9" ~ 37.4") |
| Spindle center to table top (mm) |
1025 (40.3" ) |
| Spindle taper |
BT-50 / CAT-50 |
| Spindle speed (rpm) |
20 ~ 6000 |
| X-Y-Z Cutting feed (mm/min) |
1~12000 |
| X-Y-Z Rapid traverse ( m/min) |
18 / 10 / 18 |
| Tool magazine capacity |
60 (80, 120 Opt.) |
| Max. tool diameter x length |
Ø 125 x 400 |
| Max. tool weight (kg) |
15 (33 lb) |
| Tool selection |
Bi-direction random type shortest path |
| Tool to tool change time (sec) |
3.5 |
| Spindle motor (cont./30 min) (kW) |
11 / 15 built-in |
| Hydraulic pump motor (kW) |
3.8 |
| X, Y, Z axis drive motor (kW) |
4.5 / 3.8 / 4.5 |
| Table index |
1° (0.001° Opt.) |
| Number of pallets |
2 (6, 12 Opt.) |
| Change time (APC) (sec) |
15 sec |
| Machine dimensions (L x W x H) (mm) |
6450 x 4000 x 3400 (253.9" x 157.4" x 133.8") |
| Machine weight (kg) |
21000 (46200 lb) |
